Русская версия

Home - Produce - Pipes and Fittings - Pipes and fittings for inner sewerage systems from PP

Important

Extrusion line for polymeric packing production was started up in Belarus

Carnevalli together with Terra Print have realized a large project in the field of plastic film production — the extrusion line Carnevalli Polaris COEX 3 PO was opened up at BZPI.

To foreign investors

Polypropylene pipes and fittings for inner sewerage systems

Sewerage systems, which serve small size buildings (single-unit dwellings, lodges) as well as multi-storey complex and multilevel buildings, can be entirely erected from polypropylene pipes with bell-and-spigot joints and fittings to them.

Such sewerage withstands short-term rise in drain temperature up to 95˚C, which allows to use it with high degree of reliability in the presence of washers, dishwashers and other engines in building (in compliance with standard ISO 3633).
The complete set of pipes and fittings 50 and 110 mm in diameter ensures infinite possibilities of installation of internal communications and flow pipes to sanitary ware devices. Rubber gasket rings with special plastic brasses permit to rig pressure-tight and safe joints with little efforts.
Polypropylene, sewerage material, is resistant to mechanical loads and corrosive medium influence.
In comparison with pipes made of polyvinylchloride and polyethylene pipes made of PP possess the enhanced thermal stability, and comparing with steel and iron pipes – chemical durability and light weight.
The usage of polypropylene pipes is based on the following factors:
o    Ease of mounting;
o    There is no need for particular facilities and instruments;
o    High speed of assembly;
o    Nonresponsiveness with some chemical substances, which are usually present in sewage water;
o    Minimal pressure losses, and also lack of deposits and bacterial flora, owing to internal surface features;
o    High electro insulating properties of the material;
o    Simplicity in conveyance and storage, owing to small size of articles;
o    Pipes are not prone to corrosion.
  
The life cycle of PP pipes within 50 years. In order the pipe manifold to be of high quality, it is necessary to direct its construction and mounting by specialists, who have sufficient qualification for the implementation of the operations of such kind. OJSC “Borisov Plastic Products Plant” guarantees high processing and performance characteristics of output goods, on the assumption of qualitative sewerage systems construction and mounting.
PIPES

 
 
 
 
 
 
 
 
Code
Indication
d, mm
D, mm
t, mm
S, mm
L, mm
Mass 1 item, kg
200111
Pipe sewer with a bell 50-250-PP
50
64
56
1,8
250
0,088
200214
Pipe sewer with a bell 50-315-PP
315
0,107
200112
Pipe sewer with a bell 50-500-PP
500
0,156
200113
Pipe sewer with a bell 50-750-PP
750
0,225
200114
Pipe sewer with a bell 50-1000-PP
1000
0,293
200115
Pipe sewer with a bell 50-1500-PP
1500
0,430
200116
Pipe sewer with a bell 50-2000-PP
2000
0,567
200981
Pipe sewer with a bell 50-3000-PP
3000
0,860
200961
Pipe sewer with a bell 110-250-PP
110
126
76
2,7
250
0,300
200215
Pipe sewer with a bell 110-315-PP
315
0,350
200957
Pipe sewer with a bell 110-500-PP
500
0,530
200962
Pipe sewer with a bell 110-750-PP
750
0,750
200958
Pipe sewer with a bell 110-1000-PP
1000
0,980
200959
Pipe sewer with a bell 110-1500-PP
1500
1,430
200960
Pipe sewer with a bell 110-2000-PP
2000
1,880
200283
Pipe sewer with a bell 110-3000-PP
3000
2,730

 

SLEEVE FITTING

Muff

CodeIndicationd, mmD, mmS, mmL, mmMass, kg
320626Muff performance«А»   50 -PP50631,81050,052
320488Muff performance«А» 110 -PP1101262,71270,170

 Muff coupling

CodeIndicationd, mmD, mmS, mmL, mmMass, kg
320627Muff performance«Б»  50 -PP50631,81050,053
320489Muff performance«Б» 110 -PP1101262,71270,175

Offsets

CodeIndicationаd, mmD, mmS, mml, mml1, mmMass, kg
320634Offset 45° 50-PP45°50631,863640,055
320586Offset  87°30' 50-PP87°30'50631,876770,052
320477Offset  45° 110-PP45°1101262,795890,190
320478Offset  87°30' 110-PP87°30'1101262,71321220,270
320679Offset  15° 110х3,5 -PP15°1101263,585740,270
320668Offset  30° 110х3,5 -PP30°1101263,592830,290

 Tapered pipes

CodeIndicationMass, kg
320513Tapered pipe110х50-PP0,117
320641Tapered pipe 50х40-PP0,042

 T-tubes

CodeIndicationаd, mmd1, mmS, mml, mmL, mmMass, kg
320589T-tube 87°30' 50х50-PP87°30'50501,8771570,076
320684T-tube 45° 50х50-PP45°50501,81081720,080
*T-tube 45° 110х50-PP45°110502,72002850,250
320475T-tube 87°30' 110х110-PP87°30'1101102,71282430,340
320472T-tube 45° 110х110-PP45°1101102,72002860,375
320645T-tube 87°30' 110х50-PP87°30'110502,71282500,305

 Universal T-tubes

CodeIndicationMass, kg
320517Universal T-tube 87°30' 110х110х50-PP0,424
320518Universal T-tube 87°30' 110х110х50-PP, left performance0,381
320519Universal T-tube 87°30' 110х110х50-PP, left performance0,381

 Cross bars

CodeIndicationMass, kg
320642Cross bar  87°30' 110х50х50-PP0,344
*Cross bar 87°30' 50х50-PP0,132
*Cross bar 45° 50х50-PP0,160
*Cross bar 87°30' 110х110-PP0,432
*Cross bar 45° 110х110-PP0,480

Cleanout pipes

CodeIndicationMass, kg
320523Cleanout pipe «Б» 110-PP0,952
*Cleanout pipe 50-PP0,090

Plug fittings

CodeIndicationВd, mmD, mmS, mml, mmL, mmMass, kg
320563Plug fitting 50-PP3,550611,83035,50,014
320564Plug fitting 110-PP5,01101242,73442,00,070

Pipe fixings

CodeIndicationd, mmH, mmL, mmMass, kg
320638Pipe fixing d505069,0830,0257
320643Pipe fixing d110110134,51430,0487

 

+375 (177)  74-48-07

+375 (177)  74-48-09

+375 (177)  span>74-46-96

222511, Republic of Belarus,
Minsk region,  Borisov, Dauman Str., 97

Official site of the GO "Belresursy"

Official site of the State Committee on Property of the Republic of Belarus

E-mail: bzpi@bzpi.by

 

Белорусский государственный технологический университет

Ассоциация организаций оптовой торговли

Белпочта — Быстрота. Надежность. Доступность.

Хостинг в Беларуси - Active TechnologiesХостинг в Беларуси

Developed by
Pixelhead